Descargar Imprimir esta página

Campbell Hausfeld HS5380 Manual De Instrucciones página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

BEFORE YOU BEGIN
Introduction
The Campbell Hausfeld two-stage air compressors are oil lubricated reciprocating compressors.
General Purpose Series Models Include:
Compressor pump
ASME air receiver with safety valve
Electric motor
Pressure switch
QUICK REFERENCE
RECOMMENDED OIL (2 OPTIONS)
Single viscosity SAE 30 ISO100 nondetergent compressor oil. Part number
ST125303AV (0.5 qt) or ST126701AV (4 qt).
10W30 synthetic oil such as Mobil 1
OIL CAPACITY
Approximately 0.5 quarts
UNPACKING
coolers. Do not use unit to lift other attached equipment.
After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Check for
loose, missing or damaged parts. Check to be sure all supplied accessories are enclosed with the unit. In case
of questions, damaged or missing parts, please visit www.campbellhausfeld.com for customer assistance.
Required Items - Not Included
Oil
®
or CE0032 (1 qt).
Do not lift or move unit without appropriately rated equipment. Be sure
the unit is securely attached to lifting device used. Do not lift unit by holding onto tubes or
Do not operate unit if damaged during shipping, handling or use. Damage
may result in bursting and cause injury or property damage.
1

Publicidad

loading

Este manual también es adecuado para:

Ce3000Hs5180Ce3001