Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Dimensions (L x W x H)
Net weight
Effective cutting length
Gear ratio
•
Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•
Specifications may differ from country to country.
Approved power unit
WARNING:
Never use the attachment with non-approved
power unit. Non-approved combination may cause serious injury.
This attachment is approved to use only with the following power
unit(s):
•
(Multi Function Power Head)
EX2650LH
•
(Cordless Multi Function Power Head)
BUX360, BUX361, BUX362, UX360D, UX361D, UX362D,
DUX60, XUX01, DUX18, XUX02, UX01G, GUX01
Symbols
The followings show the symbols which may be used for the equip-
ment. Be sure that you understand their meaning before use.
Read and follow the instruction manual.
Take particular care and attention!
Forbidden!
Beware of electrical lines. Risk of electrical shock.
DANGER - Keep hands away from blade.
Wear protective gloves.
Wear protective helmet, eye and ear protection.
Wear sturdy boots with non-slip soles.
Keep bystanders and animals at least 15 m (50 ft)
away from the power tool.
Keep the area of operation clear of all persons and
pets.
Hot surfaces - Burns to fingers or hands.
First aid
Guaranteed sound power level according to EU
Outdoor Noise Directive.
Sound power level according to Australia NSW Noise
Control Regulation.
1,324 mm x 104 mm x 103 mm (52" x 4-1/8" x 4-1/16")
Intended use
This attachment is designed for only the purpose of trimming shrubs,
hedges, and grasses on the ground in conjunction with an approved
power unit. Never use the attachment for the other purpose. Abusing
the attachment may cause serious injury.
EC Declaration of Conformity
For European countries only
We as the manufacturers: Makita Europe N.V., Business address:
Jan-Baptist Vinkstraat 2 3070 Kortenberg BELGIUM. Authorize
Hiroshi Tsujimura for the compilation of the technical file and
declare under our sole responsibility that the product(s);
Designation: Ground Trimmer Attachment. Designation of Type(s):
EN420MP.
Fulfills all the relevant provisions of 2006/42/EC and also fulfills all
the relevant provisions of the following EC/EU Directives: 2000/14/EC
and are manufactured in accordance with the following Harmonised
Standards: EN ISO 10517:2019, EN 62841-4-2:2019.
Place and date of declaration: Kortenberg, Belgium. 1. 5. 2022
Responsible person: Hiroshi Tsujimura, Director - Makita Europe
N.V.
Declaration of Conformity (For UK)
For UK only
We as the manufacturers: Makita Europe N.V., Business address:
Jan-Baptist Vinkstraat 2 3070 Kortenberg BELGIUM. Authorize
Hiroshi Tsujimura for the compilation of the technical file and
declare under our sole responsibility that the product(s);
Designation: Ground Trimmer Attachment. Designation of Type(s):
EN420MP.
Fulfills all the relevant provisions of S.I. 2008/1597 (as amended)
and also fulfills all the relevant provisions of the following UK
Regulations: S.I. 2001/1701 (as amended) and are manufactured
in accordance with the following Designated Standards: EN ISO
10517:2019, EN 62841-4-2:2019.
Place and date of declaration: Kortenberg, Belgium. 1. 5. 2022
Responsible person: Hiroshi Tsujimura, Director - Makita Europe
N.V.
Importer: Makita (UK) Limited, Michigan Drive, Tongwell, Milton
Keynes, Buckinghamshire, MK15 8JD, UK
SAFETY WARNINGS
Hedge trimmer safety warnings
1.
Keep all parts of the body away from the blade. Do not
remove cut material or hold material to be cut when blades
are moving. Blades continue to move after the switch is turned
off. A moment of inattention while operating the hedge trimmer
may result in serious personal injury.
2.
Carry the hedge trimmer by the handle with the blade
stopped and taking care not to operate any power switch.
Proper carrying of the hedge trimmer will decrease the risk
of inadvertent starting and resultant personal injury from the
blades.
5
ENGLISH
EN420MP
2.6 kg (5.93 lbs)
250 mm (9-7/8")
1 : 4.78
Publicidad
