Publicidad
Idiomas disponibles
Idiomas disponibles
GETTING STARTED
Position the WCS camera using the following sequence below to put the camera
in pairing mode.
1. Start with camera in the [UP] position for 2-5 seconds
2. Rotate the camera in the [DOWN] position for 2-5 seconds
3. Rotate the camera in the [UP] position for 2-5 seconds
4. If correctly done, the LED Status light will blink orange once every second
[UP] Position
8
Quick Start Guide
[DOWN] Position
Point the camera lens directly at the multimedia display. Once the
camera reads the QR code the LED's orange blinking light will slow
down to once every 3 seconds.
Wait for the WCS connection confirmation screen before continuing.
[UP] Position
In Pairing Mode
Wireless Camera System
Publicidad
