Korg KR-11 Guia De Inicio Rapido página 6

Playing back a rhythm pattern
Playing back rhythms
1
Press the MODE button
PATTERN LED lights up).
Press the MODE button to switch between pattern mode and
pad mode.
2
Turn the genre selector
Select from the presets (8BEAT–3/5/7).
3
Press the 1–14 buttons
lights up).
4
Set the tempo by turning the tempo knob
the TAP button a number of times.
5
Press the button
button lights up green).
The TAP button blinks in time with the beat (red for beat 1,
green for all other beats).
6
Press the FILL 1 and FILL 2 buttons
(switches from blinking to dark).
Two fill-ins are programmed for each pattern.
7
Press the other buttons (1–14)
To switch to patterns in other genres, use the genre selector
to select the genre.
8
Press the button
Adding a pre-count (a count-in before the rhythm
plays)
1
With playback stopped, use the FILL 1 and FILL 2 buttons
to select the pre-count sound (the button lights up).
FILL 1: sidestick, FILL 2: closed hi-hat
2
Turn the tempo knob while holding down the button for the
selected sound to set the number of beats for the pre-count.
You can set the pre-count to a value from 2 to 8 beats.
3
Press the button
The pattern begins playback after the number of beats speci-
fied for the pre-count.
Adding a swing feel
You can change the rhythm's nuance by adding swing for a
syncopated, energetic feel.
1
Long-press the TAP button
in the display .
2
Turn the tempo knob
to adjust the amount of swing.
to select pattern mode (the
to select the genre.
to select the pattern (the button
or by pressing
to play back the pattern (the
to play back a fill-in
to switch the pattern.
to stop (the button goes dark).
to begin playback.
to show the amount of swing
while holding down the TAP button
Finger drumming
Playing
1
Press the MODE button
LED lights up).
2
Turn the genre selector
A drum kit that's appropriate to the genre is selected.
3
Tap the 1–14 buttons
play in real time (the buttons light up).
Additional functions
Aside from the functions listed in this guide, you can also do the
following things listed below. See the Owner's Manual for
details.
• Create a rhythm pattern
• Turn on the metronome
• Play a reference tone
• Listen to the demo performances
• Use a foot switch (sold separately) to play back or stop pat-
terns, play the kick drum sound and so forth
• Set the auto power-off feature
• Adjust the pad sensitivity
• Restore the factory settings
Specifications
Jacks:
Headphones/line out, FOOT SW 1/2, DC 9V jack
Power supply:
Four AA-size alkaline batteries (sold separately) or AC adapter
(DC 9V, , sold separately)
Battery life:
Approx. 18 hours (varies depending on the batteries used and on the
conditions of use)
Current consumption:
1300 mA (peak value)
Dimensions (W × D × H):
160 × 115 × 44 mm/6.30" × 4.53" × 1.73"
Weight:
279 g/0.62 lb (not including batteries)
Included items:
Quick Start Guide
Accessories (sold separately):
AC adapter (DC 9V,
* Specifications and appearance are subject to change without
notice for improvement.
6
to select pad mode (the PAD
to select a drum kit.
and the FILL 1/FILL 2 buttons
https://www.korg.com/us/support/
download/product/kr_11/
), pedal switch (PS-1, PS-3)
to