Patron RP 400 Manual Del Usuario página 14

6. Put the oil drain hose in the holder and tighten the
screw (A).
7. Fill with new engine oil. Refer to the engine manual
for the correct type of engine oil.
8. Do a check of the engine oil level.
Air filter
WARNING:
protection when you clean or replace the
air filter. Discard used air filters correctly.
Inhalation of the dust in the air filter may be
dangerous to your health.
CAUTION:
air filter, or the dust will go into the engine
and cause engine damage.
To clean or replace the air filter (RP 400,
Honda)
WARNING:
with compressed air. This causes damage to
the air filter and the risk increases that you
breathe the dangerous dust.
1. Turn the knob on the air filter cover and remove the
air filter cover.
14
A
Use approved respiratory
Always replace a damaged
Do not clean the air filter
2. Remove the paper filter element and the foam filter
element (A).
3. Clean the air filter housing with a brush.
4. Examine the air filter elements for damage.
5. Tap the paper filter element against a hard surface
or use a vacuum cleaner to remove the particles.
CAUTION:
the vacuum cleaner touch the surface of
the paper filter element. Keep a small
distance. The sensitive surface of the
paper filter element becomes damaged
if objects touch it.
6. Clean the foam filter element with a solution of soap
and water.
7. Flush the foam filter element in clean water.
8. Compress the foam filter element to remove the
water and let the foam filter element dry fully.
9. Lubricate the foam filter element with engine oil.
10. Push a clean cloth against the foam filter element to
remove unwanted oil.
11. Install the air filter in the opposite sequence.
To do a check of the V-belt
WARNING:
without the V-belt cover installed.
1. Stop the engine.
A
Do not let the nozzle of
Do not operate the product
2425 - 001 - 12.04.2024