Patron RP 400 Manual Del Usuario página 17

1. Remove the dipstick (A) from the hydraulic oil tank.
A
Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
Lift the product to move it shorter distances. For longer
distances, put the product on a transportation vehicle.
CAUTION:
behind a vehicle.
To lift the product
WARNING:
equipment has the correct specification to
lift the product safely. The type plate on the
product shows the product weight.
WARNING:
product. Make sure that the lifting eye, the
vibration damping units and the safety straps
are correctly installed and not damaged.
WARNING:
or near a lifted product.
2425 - 001 - 12.04.2024
B
Transportation, storage and disposal
Be careful during
Do not tow the product
Make sure that the lifting
Do not lift a damaged
Do not walk or stay below
2. Use an oil drain pump to drain the hydraulic oil from
the hydraulic oil tank.
3. Clean the opening of the hydraulic oil tank.
4. Replace the breather filter (B).
5. Fill with hydraulic oil of the correct type. Refer to
Technical data on page 18 .
6. Put the dipstick into the hydraulic oil tank.
1. Lock the handle in upright position.
2. Attach the lifting equipment to the lifting eye.
WARNING:
hooks, chains or other lifting equipment
Do not use metal
17