Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
1
INSTALL FAUCET
Turn off hot and cold water supplies
before beginning.
• Insert FAUCET SHANKS (1) through the deck.
• Thread MOUNTING NUTS (2) on to FAUCET
SHANKS (1) to secure the faucet.
Note: Deck Hole diameter must be 1" minimum.
Note: Ensure the plastic plaster guard is properly
seated in the base of the faucet.
2
INSTALL DRAINS
• Insert DRAIN SHANK (1) through the sink basin.
• Slide RUBBER GASKET (2) on to DRAIN SHANK (1)
from below the sink basin.
• Thread MOUNTING NUT (3) on to DRAIN SHANK (1)
from below the sink basin and hand tighten.
Note: To operate the drain, push down on the top to
toggle it open or closed.
B
3
SECURE FAUCET & MAKE WATER SUPPLY CONNECTIONS
• Connect water supply to FAUCET (1) with 1/2" IPS FLEXIBLE
SUPPLIES (2) or 3/8" O.D. BULL-NOSE RISERS (3). Use
adjustable wrench to tighten connections.
NOTE: Do not over tighten.
NOTE: Be careful not to kink copper supply when bending.
Use tubing cutter to cut to proper length.
NOTE: Flexible supplies have to be purchased separately.
A
C
D
1
2
3
1
2
COUPLING NUT
3
FERRULE
1
2
Publicidad
