Descargar Imprimir esta página

JVC KD-SR61 Manual De Instrucciones página 19

Publicidad

Idiomas disponibles

Idiomas disponibles

Wiring connection
KD-SR61
Vehicle dashboard
Factory wiring
harness (vehicle)
Blue: To power antenna
Blue/white: To amplifier
Vehicle-specific Wiring
Harness (separately
purchased)
For more information:
Metra Electronics:
www.metraonline.com
Scosche Industries:
www.scosche.com
KD-SR41
Front/ rear/ subwoofer
output
Antenna terminal
To the steering
Light blue/yellow
wheel remote
STEERING
control adapter
WHEEL
REMOTE
Recommended
Join the same color wires together.
connection
Blue/white: Remote (200 mA max.)
Orange/white: Illumination
Brown: Tel muting
Yellow: Battery 12 V
Red: Ignition 12 V
Black: Ground
Gray: Front speaker (right)
Gray/black
White: Front speaker (left)
White/black
Purple: Rear speaker (right)
Purple/black
Green: Rear speaker (left) *
Green/black *
Signal cord
(not supplied)
Fuse (10 A)
Ignition switch
Separate red wire
Make this connection if your
vehicle factory wiring harness
does not have "12 V ignition
switch" wire.
*
2
You can also connect a
subwoofer speaker directly
using this lead without an
2
external subwoofer amplifier.
2
For setting,  12, 13.
*
1
Firmly connect the ground
wire of the amplifier to
the car's chassis to avoid
JVC Amplifier *
1
damaging the unit.
Part list for
installation
Remote wire
(not supplied)
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
Car fuse block
(D) Wiring harness
(E) Extraction key
ENGLISH
19

Publicidad

loading

Este manual también es adecuado para:

Kd-sr41