Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
INSTALLING THE WINDOW KIT
The window kit can be used in either a hung window or a sliding window application. The images are for
a hung window. The steps for a sliding window are the same.
1. Assemble the window kit ensuring it fits the width of the opening.
2. Insert the assembled window slider kit into the window opening.
3. Attach the window slider adapter to the hole in the window slider kit.
Note: It may be easier to attach the window slider adapter to the window slider kit before placing the kit in
the window.
Note: If the opening is less than the minimum length of the window slider kit, cut the panel without the hole
short enough to fit the opening. If it is required to cut the length of the slider with the hole, cut opposite the
hole.
IMPORTANT WARNING
Do not leave this appliance unattended in a space where people or animals who cannot
react to a malfunction are located. A malfunction such as the exhaust hose becoming
dislocated, can cause extreme overheating or death in an enclosed, unattended space.
13
Publicidad
