Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
OPERATING MODES
Cool Mode
• Press the mode button until the "Cool" symbol
illuminates.
• Use the increase and decrease buttons to choose
the desired temperature.
• The temperature can be set within a range of 18
- 32°C (64 - 90°F).
• Use the fan button to choose the desired fan
speed.
*F2 High used to achieve the selected
temperature as quickly as possible.
*F1 Low used when a lower noise level is
required
• The exhaust hose MUST be installed during cool
mode to ensure the best results.
Note: The appliance will self evaporate any
collected water. DO NOT attach a drain hose to the
unit when it is is Cool (air conditioning) mode.
Dry Mode
• Press the mode button until the "dh" symbol
appears on the display.
• The fan speed will be set automatically by the
unit and can not be adjusted.
• The exhaust hose MUST be installed during dry
mode to ensure the best results.
• It may be necessary to install a continuous drain
hose during dry mode to remove excess water.
Note: Continuous drain hose is not included. If
purchasing a continuous drain hose, the hose
required size is 1/2" (12.7mm).
OPERATING MODES
Fan Mode
• Press the mode button until the fan icon appears
on the display.
• Press the fan button to choose the desired fan
speed: low or high.
• The exhaust hose does not need to be installed
during fan mode.
• Fan mode can be used to run the fan without
engaging the cooling, heating or dehumidifying
functions.
16
Publicidad
