Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
Sleep function
The Sleep function maintains the room at optimum
temperature without excess fluctuations in either
temperature or humidity with silent operation. Fan
speed is always at Low, while room temperature
and humidity vary gradually to ensure a
comfortable sleep.
• Select the cool or heat mode.
• Press the Sleep button until the sleep symbol
appears.
The Sleep function will reduce the screen brightness
and set the fan speed at Low.
The Sleep function can be cancelled at any time
during operation by pressing the "Sleep", "Mode"
or "Fan Speed" button.
In COOL mode, the slected temperature will
increase by 1°F (1°C) per hour in a 2 hour period.
The new temperature will hold for 6 hours and then
return to original setting.
In DRY mode the Sleep function is still available.
Swing function
This model does not have the auto swing function.
The louvers must be set manually.
• Hold the horizontal louvers and move up or
down to direct the flow of the air.
• Hold the vertical louvers and move left or right to
direct the flow of the air.
Change the unit of Temperature
The display of the temperature can be changed
when the unit is running by pressing the
°C/°F button.
Before the change the temperature will display as
shown in Fig1. After the change the temperature
will display as shown in Fig2.
Setting timer
The timer can be used to delay the appliance start-
up or shutdown which can reduce energy usage
and optimize operating periods. Timers can be
cancelled by pressing the Timer or Power button.
Auto On
Turn unit on, choose mode you require, turn
appliance off. The images below is an example of
setting a timer in cool mode.
Press the Timer button twice, the screen will display
hours, the Timer On symbol and h symbol are
flashing.
Press the increase or decrease button until the
corresponding time is displayed. Press the Timer
button, the timer will be active. The Timer symbol
and h are displayed on the screen.
20
Publicidad
