Grohe Sensia 36507SH0 Guia De Inicio Rapido página 18

Handling precautions
Do not expose the toilet to direct
sunlight. It can cause discoloration of
the plastic parts. Direct sunlight can
furthermore lead to the remote
control and the sensor not working properly.
Do not open and close the toilet seat
or lid by force. It may cause cracking,
electrical leakage or the auto open/
close feature to malfunction.
Do not pour water or cleaning
agents onto the remote control. It
could cause it to malfunction.
Do not use electrical heaters in the
vicinity of the toilet. It could cause
discoloration of the plastic parts or
malfunctions.
Do not use any paper other than
toilet paper. Be careful not to drop
any foreign materials in the bowl, as
they may clog the drainpipe. If you drop
anything in the bowl, remove it before
flushing.
If the toilet should become clogged,
use a plunger to unclog it. Do not
flush the toilet and do not fill water
into it by other means (e.g. with a
bucket) until it is unclogged. Wastewater
spilling over poses a risk of electric shock
and damage to the device (electronic
components inside the toilet seat can get
damaged).
Do not operate the remote control with wet
hands. It could cause it to malfunction.
The device must not be used at installation
sites that are not stationary (e.g. on ships).
Never use steam cleaners to clean the
device.
The steam of a steam cleaner could come
into contact with energized parts and cause
a short-circuit.
17
GB
The shower toilet must not be operated on
stand-alone inverters, such as those found
in autonomous power supplies, e.g.
photovoltaic systems. In such systems,
switching on the device can cause power
spikes that may cause safety shutdowns.
This can damage the electronic
components!
The shower toilet also must not be used on
so-called energy saver sockets, as they
reduce the power supplied to the device
which may in turn lead to the device
warming up.
Caution – suffocation hazard!
Children can suffocate when they play with
packaging materials (e.g. foil) and wrap
themselves into the materials or pull them
over their heads. Keep packaging materials
away from children.
The cable specifications are printed on the
nameplate.
They must match the specifications of the
power grid.
When contacting the Grohe Service
department, always state the following:
– Model name
– Serial number
– Power supply information (network
voltage/frequency/maximum cable
specifications).
GROHE AG hereby declares that the radio
equipment type GROHE Sensia and Sensia
Pro are in compliance with Directive
2014/53/EU. The full text of the EU
declaration of conformity can request by
e-mail: service.de@grohe.com
Notification of changes
This user manual corresponds to the current
technical design of the device at the time of
print.
We reserve the right to introduce changes
to meet technical developments.
This category of device does not
belong in domestic waste. It must be
disposed of separately in
accordance with the relevant
national regulations.