Jotul F 105 B Instrucciones Para Instalación página 22

Fig. 26
7. Insert the fl ue pipe into the rear outlet.
NB: It is important for the joints/fl ue pipes to be sealed
completely. Air leaks may prevent them from operating
properly.
Product without convection plate
NB: If you will not use a convection plate, the product will have
diff erent setup conditions (see fi g. 1).
Fig. 27
• If the convection plate is not going to be used, screw the
screws (A) back again after removing the convection plate.
Use the Allen key from the bag of screws.
4.7 Performance check
Always check the control handles once the product has
been assembled. These should move easily and work in a
satisfactory manner.
Fig. 28
A
A
The Jøtul F 105 R is equipped with the following
operating options:
Air vent (A)
Pushed to the left:
Pushed to the middle:
Pushed all the way to the right:
Door handle (B)
Open by pulling the handle out.
Stacking height (C) for wood (the holes may not be covered).
Página 22/77
ENGLISH
Min. Maks.
Kindling
A
Minimum
Maximum
For kindling
C
B
21