Descargar Imprimir esta página

SUHNER ABRASIVE Turbo Trim ROTO TT Vario Speed Documentación Técnica página 26

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
shaft in storage.
3.2 t
/
urn on
v
Before starting, take the hand piece out of
the suspension attachment and hold this
tightly with outstretched arm. For reasons
of safety, the machine cannot be started when the hand
piece is suspended in the suspension attachment. The
machine generates a high starting torque!
Select speed (1). See the technical document of the hand
piece. Press main switch (2). Start by pressing the button
«on» (3).
Stop by pressing the button «off» (1) or by lifting the lever
(2). Hold the hand piece tightly until the ring cutter has
come to a stop.
26
100024231_AA-01_BA_ROTOTT_VarioSpeed.indd 26
100024231_AA-01_BA_ROTOTT_VarioSpeed.indd 26
off
!
ery Sharp blade
4. S
ervice
4.1 m
AintenAnce preVentiVe
4.1.1 m
Achine
Store the machine in a dry, clean place.
Keep cooling openings free. Check the
connecting line regularly. Have a dam-
aged line or plug replaced. Risks to safety are eliminated
only when the manufacturer or its legal representative re-
places the connecting line. Use only components in per-
fect condition.
4.1.2 f
lexiBle shAft
Store the flexible shaft in a dry, clean place. New
or freshly greased shafts require a running-in pe-
riod of about one hour. Lubricate monthly flexible
shafts that are used every day. Replace worn shaft cores
or couplings.
Draw the shaft core out of the casing. Remove old shaft
grease. Apply only a small quantity of food-grade grease
to the shaft core. Keep hose couplings clean.
4.1.3 c
leAning
The machine is built to prevent water from pene-
trating through the top. The motor, however, must
be cooled. This takes the form of ventilation slots
in the bottom of the housing. The external components
can be cleaned with a mild agent of pH < 9. Make sure
that no liquid can penetrate the openings on the bottom.
Remove meat residue from the motor after every use.
v
ery Sharp blade
Before the production plant is cleaned, the machine must
be wrapped or covered with a plastic sheet that protects it
from aggressive chemicals and cleaning agents.
/m
aintenance
!
08.12.2022 14:20:07
08.12.2022 14:20:07

Publicidad

loading

Productos relacionados para SUHNER ABRASIVE Turbo Trim ROTO TT Vario Speed