SUHNER ABRASIVE Turbo Trim ROTO TT Vario Speed Documentación Técnica página 27

4.1.4 m
Alfunction
If, at any time, this machine should not operate
normally or exhibit changes in its functions, it must
be switched OFF immediately, disconnected from
the electricity supply, and marked "Defect" until the ap-
propriate repairs have been carried out and the machine
is again ready to operate.
4.2 r
epAir
If despite strict observance of the manufacturing and test-
ing method the machine should happen to fail, it must be
repaired by an authorized SUHNER agency.
Any replacement needed for the connecting line must be
installed by the manufacturer or its agent if safety risks are
to be eliminated.
4.3 w
ArrAnty
In the event of the tool being improperly handled, used
for purposes for which it is not intended and/or of the ser-
vice and maintenance instructions not being observed by
non-authorized persons, no warranty shall be in effect for
damages/consequential damages. Complaints can only
be honored if the machine is returned in the undisassem-
bled condition.
4.4 s
torAge
Temperature range during operation: 0 to +50°C.
Relative air humidity max.: 90% at +30°C, 65% at +50°C
4.5 d / e
isposAl
This machine consists of materials which can be dis-
posed of in a recycling process.
Before disposal, render the machine unusable.
Do not throw the machine into the garbage collec-
tion.
According to national regulations this machine
must be recycled in an environmentally-friendly manner.
100024231_AA-01_BA_ROTOTT_VarioSpeed.indd 27 100024231_AA-01_BA_ROTOTT_VarioSpeed.indd 27
nVironmentAl compAtiBility
27
08.12.2022 14:20:07 08.12.2022 14:20:07