Dreame X40 Ultra Manual De Usuario página 7

Preparing Your Home
EN
Before cleaning, please move away unstable, fragile, valuable or dangerous
items, and clean up cables, cloths, toys, hard objects and sharp objects on
the ground to avoid being entangled, scratched or knocked over by the robot
and causing losses.
Open the door of the room to be cleaned, and put the furniture in its proper
place to leave more space.
Note:
· When operating the robot for the first time, follow it around while cleaning to remove any potential obstacles in time.
· The LED auxiliary light will provide auxiliary lighting in dimly lit environments.
· Do not vacuum hard objects like stones, steel balls and toy parts, or sharp objects like construction waste, broken glass and nails, otherwise the ground may be
scratched.
10
Before cleaning, place a physical barrier at the edge of the stairs and sofa to
ensure the secure and smooth operations of the robot.
To prevent the robot from not recognizing areas that need to be cleaned, do
not stand in front of the robot, threshold, hallway, or narrow places.
Before Use
1. Place the Base Station and Connect to an Electrical Outlet
Place the base station in a location that is as open as possible with a good
Wi-Fi signal. Remove any objects that are closer than 60" (1.5 m) from the
front and 2" (5 cm) from either side of the base station. Insert the power cord
into the base station and plug it into the socket.
＞2"
＞2"
＞60"
I : ON
O : OFF
Firmly insert the power cord
upwards until the indicator turns
on.
Note:
· Make sure that no objects might block the signaling area.
· To prevent water stains from wetting wood floors or carpets, placing the
base station on tile floors or marble floors is recommended.
2. Install the Ramp Extension Plate
3. Remove Robot Protections and Install the Mop Assembly
④
②
①
③
EN
11