Publicidad
Idiomas disponibles
Idiomas disponibles
-
The declared vibration total values and the declared noise emission values have been measured in
accordance with a standard test method and may be used for comparing one tool with another.
-
The declared vibration total values and the declared noise emission values may also be used in a
preliminary assessment of exposure.
WARNINGS
-
The vibration and noise emissions during actual use of the power tool can differ from the declared
values depending on the ways in which the tool is used especially what kind of workpiece is processed;
-
It is necessary to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time)
INTENDED USE
The lawn mower is intended for private use i.e. for use in home and gardening environments.
Private use of the lawn mower refers an annual operating time generally not exceeding that of 50 hours,
during which time the equipment is primarily used to maintain small-scale, residential lawns and
home/hobby gardens. Public facilities, sporting halls, and agricultural/forestry applications are excluded.
CAUTION:
Due to the high risk of bodily injury to the user, the lawn mower may not be used to trim bushes, hedges or
shrubs, to cut scaling vegetation, planted roofs, or balcony-grown grass, to clean (suck up) dirt and debris
off walkways, or to chop up tree or hedge clippings. Moreover, the lawn mower may not be used as a
power cultivator to level out high areas such as molehills.
For safety reasons, the lawn mower may not be used as a drive unit for other work tools or tool kits of any
kind, unless they have been expressly permitted by the manufacturer.
The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse.
The user/operator and not the manufacturer will be liable for any damage or injuries of any kind caused as
a result of this.
Please note that our equipment has not been designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
BEFORE USE
UNPACKING
Open the packaging and take out the equipment with care.
Remove the packaging material and any packaging and/or transportation braces (if available).
Check to see if all items are supplied.
Inspect the equipment and accessories for transport damage.
If possible, please keep the packaging until the end of the guarantee period.
ASSEMBLY
Only carry out work that you know you are capable of.
If in doubt, consult an expert or our service centre directly.
MOUNTING THE LOWER BAR (FIG.B)
1) Fold the lower bar (3) upwards.
2) Turn the lower tightening levers (5)clockwise to fasten.
3) Lock the tightening levers (5) by pressing them in the direction of the lower bar (3). The tightening
levers must be pulled tight and then positioned against the bar so that tightening can be carried out
91
EN
EN
Publicidad
