Power GD97754 Manual De Instrucciones página 93

CHECKING THE BATTERY CHARGING LEVEL
The battery comes with an integrated battery level indication LED.
The battery status is displayed as follows by the four LEDs of the battery level indication:
LED color
Green-Orange-Red
Orange-Red
Red
Press on the battery charge level button on the battery pack. You can read the battery status from the
battery level indication LED.
There is power display behind of hand protection board, press the level button on the display, You can
read the battery status from the battery level indication LED.
CAUTION!
 If the red charge control LED flashes, it means that the battery pack has been overheated and cannot
be charged.
 If both the red and greed charge control LED flash, it means that the battery pack is defected.
Warning! The device must only be adjusted when the motor is switched off and the blade is
stationary. There is a risk of personal injury. Switch off the apparatus, remove the ignition key (10) and
wait for the blades to come to a standstill.
MOUNTING/REMOVING THE GRASS COLLECTION BOX (FIG.E)
1) To mount the grass collection box (13), lift the impact protection (4) and suspend the grass collection
box (13) from both receptors.
2) Fold the impact protection (4) over the grass collection box (13). This will hold the grass collection box
in the correct position.
3) To remove the grass collection box (13), lift the impact protection (4) and remove the grass collection
box (13).
4) Fold the impact protection (4) back over the device housing (12).
Warning! Work may not be carried out using the device without the impact protection or grass
collection box. There is a risk of injury.
SETTING THE CUTTING HEIGHT (FIG.F)
The apparatus has 6 positions for adjusting the cutting height:
 25 mm/35 mm - low cutting height
 45 mm/55 mm - medium cutting height
 65 mm/75 mm - large cutting height
1) Hold the carrying handle (6) and lift the device or push the device down.
2) Grip the lever (7) for adjusting the cutting height and move it past the ratchet mechanism to the
desired cutting height.
The correct cutting height is between 25 and 45 mm for an ornamental lawn and about 45 - 65 mm for a
utility lawn.
Note: A high cutting height should be selected for the first mowing of the season.
Meaning
Maximum charge/power
Medium charge / power
Weak charge – Recharge the battery
93