17
8
1.
Uncoil the garden hose (17).
2.
Let the water flow through the garden hose (17)
for 30 seconds.
3.
Turn the water supply off.
4.
Install and tighten the end of the garden hose
(17) to the water inlet (8) connector.
CAUTION
There must be a minimum of 10 feet of free hose
between the water inlet and the water supply.
4.2
USE THE SPRAY GUN
22 21
WARNING
For safe control, keep your hands on the spray gun
at all times.
• Pull and hold the spray gun trigger (21) to start the
machine.
• Release the spray gun trigger (21) to stop water flow
through the spray tip.
4.2.1 UNLOCK THE SPRAY GUN TRIGGER
• Push the trigger safety lock-out (21) down until it
clicks into the slot.
4.2.2 LOCK THE SPRAY GUN TRIGGER
• Push the trigger safety lock-out (21) up and into its
original position.
English
4.3
CHANGE THE SPRAY TIP
2.
18
3.
Click
Before you change the spray tip:
1.
Pull the spray gun trigger to release water
pressure.
2.
Engage the trigger safety lock-out on the spray
gun.
3.
Stop the machine.
Do not point the spray wand at your face or others'.
4.3.1 NOZZLE TYPE
SPRAY TIP
O
15
9
1.
4
19
WARNING
WARNING
APPLICATION
Yellow - Narrow fan tip (15° )
• The yellow pressure washer tip
provides high versatility with its
15 degree angle tip. Referred to
as the washing tip, because it
provides adequate pressure to re-
move dirt from surfaces, but is
designed to not damage many
surfaces. This pressure washer
tip is designed for "sweeping" fo-
liage or debris given its wide an-
gle. This tip is versatile due to its
wide area of cleaning and strong
pressure application.
EN