Eaton TRIPP LITE Serie Manual Del Propietário página 4

Installation
1. Make sure the power to all devices that
you will be connecting is turned off.
2. Connect an HDMI source device to an
Input port on the switch.
Note: The length of the HDMI cable connecting
the source to the switch must not exceed 16 ft.
(5 m).
3. Repeat step 2 to connect source devices
to the remaining Input ports on the
switch.
4. Connect the Output port on the switch to
the HDMI input port of your display.
Note: The length of the HDMI cable connecting
the switch to the display must not exceed 16 ft.
(5 m).
4