Bosch GWS 24-230 Professional Manual Original página 23

The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting and brushing metal,
stone and plastics, as well as roughing metal and making
holes in stone materials using diamond annular cutters,
without the use of water. Make sure that the correct protect-
ive guard is used (see "Operation", page 27).
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind stone materials
with diamond grinding heads, to grind metal and stone with
grinding heads, or to work on composite materials.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Spindle lock button
(2) On/off switch
Technical Data
Angle Grinder
Article number
Rated power input
A)
Rated no-load speed
Max. grinding disc diameter/rubber
sanding pad diameter
Grinding spindle thread
Max. thread length of grinding spindle
Restart protection
Soft start
Overload protection
B)C)
Weight
Protection class
A) Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed
must not exceed the rated no-load speed and is therefore lower.
B) Depends on protective guard ((8), (7), (9)), auxiliary handle ((5), (4)) and extraction guard (25) in use
C) Weight without mains connection cable and without mains plug
Bosch Power Tools
(3) Dust box (GWS 24-180 JZ / GWS 24-230 JZ /
GWS 24-230 PZ)
(4) Vibration-damping auxiliary handle (insulated grip-
ping surface)
(5) Standard auxiliary handle (insulated gripping sur-
face)
(6) Locking screw for protective guard
(7) Protective guard for grinding
(8) Protective guard for cutting
(9) Cover for cutting
(10) Mounting flange with O‑ring
(11) Grinding disc
(12) Cutting disc
(13) Diamond cutting disc
(14) Clamping nut
(15) Quick-clamping nut
(16) Two-pin spanner for clamping nut/round nut
(17) Handle (insulated gripping surface)
(18) Grinding spindle
(19) Hand guard
(20) Rubber sanding pad
(21) Abrasive disc
(22) Round nut
(23) Cup brush
(24) Open-ended spanner
(25) Extraction guard for cutting with cutting guides
(26) Diamond annular cutter
a) This accessory is not part of the standard scope of delivery.
GWS 24-180 GWS 24-230
3 601 HC2 0.. 3 601 HC3 0..
W 2400
–1
min 8500
mm 180
M 14
mm 25
–
–
–
kg 5.6–7.8
/ II
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
GWS 24-180 P
3 601 HC2 1..
2400 2400
6500 8500
230 180
M 14 M 14
25 25
– –
– –
– –
5.8–8.8 5.6–7.8
/ II / II
1 609 92A 9HP | (25.03.2024)
English | 23
a)
GWS 24-230 P
3 601 HC3 1..
2400
6500
230
M 14
25
–
–
–
5.8–8.8
/ II