Publicidad
Idiomas disponibles
Idiomas disponibles
3. The power supply cable sections can withstand the load specified on the rating plate.
To connect the hob to the mains power supply, do not use adapters, reducers, or branching
devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75˚C at any point.
Check with an electrician whether the domestic wiring system is suitable without alterations.
Any alterations must only be made by a qualified electrician.
N1
L2
N2
220-240 V~
If the cable is damaged or to be replaced, the operation must be carried out the by after-sale agent
•
with dedicated tools to avoid any accidents.
If the appliance is being connected directly to the mains an omnipolar circuit-breaker must be
•
installed with a minimum opening of 3mm between contacts.
The installer must ensure that the correct electrical connection has been made and that it is
•
compliant with safety regulations.
•
The cable must not be bent or compressed.
The cable must be checked regularly and replaced by authorised technicians only.
•
•
The bottom surface and the power cord of the hob are not accessible after installation.
Correct disposal of this product
N2
L1
The symbol on the product, or in its packaging, indicates that this product may not be
treated as household wasted, Instead, it should be taken to the appropriate waste
collection point for the recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by the
inappropriate waste handling of this product. For more detailed information about the
recycling of this product, please contact your local council, your household waste
disposal service, or the shop where you purchased the product.
N1
L2
L1
400 V~
220-240 V~
220-240 V~
25
N1
L2
L1
N2
220-240 V~
220-240 V~
Publicidad
