Publicidad
Idiomas disponibles
Idiomas disponibles
Routine Maintenance
EN
Clean the Dust Box and Filter
1. Press the water tank release clip to remove the 2-in-1 water tank with
dust box.
2. Open the dust box cover and empty the dust box as shown in the diagram.
16
3. Remove the filter and tap its basket gently.
Note:
· Do not attempt to clean the filter with a brush, a finger or sharp objects to
prevent damage.
4. Rinse the dust box and filter with water and dry them completely
before reinstalling.
Note:
· Rinse the dust box and filter with clean water only. Do not use any detergent.
· Use the dust box and filter only when they are completely dry.
Routine Maintenance
Clean the Main Brush
1.Press the brush guard clips inwards to remove the brush guard and lift the
brush out of the robot.
R
2.Use a proper cleaning tool to remove any hairs tangled in the brush.
Note: Do not pull out the hair tangled in the main brush excessively. Otherwise,
the brush may be damaged.
Clean the Main Wheel/Omnidirectional Wheel
R
L
L
R
OFF ON
Note: Use a tool such as a small screwdriver to separate the axle and tire of the
omnidirectional wheel.
Clean the Side Brush
Pull out the side brush and use the included cleaning tool to remove any
hair tangled in the brush.
EN
17
Publicidad
