Publicidad
Idiomas disponibles
Idiomas disponibles
5. When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator flash for 5
seconds
NOTE
• The red dot next to power level indicator will illuminate indicating that zone is selected.
• If you want to change the time after the timer is set, you have to start from step 1.
• The method for setting two zones is the same as mentioned above.
Setting the timer to turn more than one cooking zones off
• If more than one heating zones use this function, the timer indicator will show the lowest time.(e.g. zone
1# setting time of 5 minutes, zone 2# setting time of 15 minutes, the timer indicator shows "5".)
NOTE
• The red dot next to power level indicator will flash.
• Once the countdown timer expires, the corresponding zone will switch off. Then it will show the new min.
timer and the dot of corresponding zone will flash.
• When cooking timer expires, the corresponding cooking zone will be switch off automatically.
(set to 5 minutes)
zone 1
6. When cooking timer expires, the correspond-
ing cooking zone will be switched off auto-
matically.
The display will show "H" which means hot;
19
(set to 15 minutes)
zone 2
V.1
Publicidad
