RIDGID HD1612M0 Manual Del Usuario página 19

ASSEMBLY
INSERTING THE TUG-A-LONG POSITIVE
LOCKING HOSE WITH DUAL-FLEX (Fig. 6)
1. Locate the end of the Tug­A­Long Positive Locking
Hose with Dual­Flex (J) and align it with the Drum
Vac Inlet. Align the Hose Release Button with the
Drum Vac Inlet Ridges. Push the Hose end straight
into the Vac Inlet until the Hose Release Button fully
engages the Inlet Ridges.
2. To Remove Hose: Rotate the end of the
Tug­A­Long Positive Locking Hose with Dual­Flex (J)
in either direction to release the Hose Release
Button Latches from the Drum Vac Inlet Ridges.
Press the Hose Release Button and pull the Hose
end straight out of the Vac Inlet.
SP7115-1 HD1612M0 SE.indd 19 SP7115-1 HD1612M0 SE.indd 19
INSERT HOSE
19
Fig. 6
Inlet Ridges
Drum Vac Inlet
Hose Release
Button
(J)
REMOVE HOSE
7/30/20 8:42 AM 7/30/20 8:42 AM