Disassembly - Abicor Binzel Maxi Flex/HD Instructivo De Servicio

11 Disassembly

11 Disassembly
DANGER
Risk of injury due to unexpected start-up
The following instructions must be followed during all maintenance, servicing, assembly, disassembly, and repair work:
• Switch off the power source.
• Disconnect all electrical connections.
NOTICE
• Disassembly may be carried out only by qualified personnel (in Germany see TRBS 1203).
• Please consult the operating instructions for the welding components, such as the power source, welding torch system,
re-circulating cooling unit etc.
• Observe the information provided in the following section:
 8 Putting out of operation on page EN-14
2
1
5
1 Sleeve
2 MasterLiner
Fig. 13 Disassembly
1 Hold the connection sleeve (3) tightly and twist the sleeve (1) clockwise to unlock it.
2 Remove the MasterLiner (2), wire and parts to be disassembled.
EN - 18
3 2
3 Connection sleeve
4 Wire feed
MasterLiner Maxi Flex/HD; Basic Flex/HD
1 3
5 Wire drum
BAL.0510.0 • 2018-08-16
4