Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING THE POWER HEDGE TRIMMER
This product is intended for cutting and pruning garden trees such as hedges. Do not use it for work
other than its intended purpose (cutting metal or hard objects, etc.) as it may cause injury or damage.
Read the SAFETY INSTRUCTIONS on page (7) concerning the proper use of the Hedge Trimmer.
The Hedge Trimmers is designed for cutting and trimming foliage and small branches up to 7 mm in
diameter. Although the Hedge Trimmer is capable of cutting larger diameter branches, wear and tear
of the machine would be proportionally increased.
If a branch or the like bites into the blade and the blade stops, stop the engine and then remove the
branch or the like. If you do not stop the engine, the blades will start moving as soon as you remove
them, which can cause serious injury.
Always ensure that all handles and guards are fitted when using the hedge trimmer.
Always wear gloves and protective clothing when operating the Hedge Trimmer. If the cutting blades
become jammed, stop the engine immediately. Make certain all moving parts have stopped and
disconnect the spark plug before inspecting the equipment for damage. Never use a Power Hedge
Trimmer that has chipped, cracked, broken cutting blades or excessively worn cutting device .
Exhaust heat from the muffler may get heated leaves and turn the color of leaves.
(1)
HORIZONTAL
(1) CUT THE TOP SURFACE
Tilt the cutting blades slightly with respect to the cutting direction, and proceed in an arc with your
body as the axis.
Lower the cutting blade slightly in the cutting direction.
(2) CUT THE SIDES
While maintaining a stable condition, keep the cutting blade as far away from your body as possible
and cut from bottom to top.
WARNING
WARNING
CAUTION
CAUTION
Lower the cutting blade slightly in the
cutting direction
─ 15 ─
(2)
VERTICAL
English
Publicidad
