Descargar Imprimir esta página

Bad Boy HT225-24 Manual Del Propietario U Operador página 7

Cortasetos

Publicidad

Idiomas disponibles

Idiomas disponibles

LIMITED WARRANTY STATEMENT ........................... 1
FEDERAL EMISSION CONTROL ............................... 3
TABLE OF CONTENTS ............................................... 5
INTRODUCTION ......................................................... 5
SPECIFICATIONS ....................................................... 6
PRODUCT DESCRIPTION ......................................... 6
SAFETY INSTRUCTIONS ........................................... 7
BEFORE OPERATION .............................................. 10
Thank you for purchasing a BAD BOY product.
BAD BOY, it's distributors, and dealers want you to be completely satisfied with your new product. Please
feel free to contact your local Authorized Service Dealer for help with service, genuine BAD BOY parts, or
other information you may require.
Whenever you contact your Authorized Service Dealer or the factory, always know the serial number of
your product. This number will help the Service Dealer or Service Representative provide exact information
about your specific product. You will find the model and serial number located in a unique place on the
product (Product Description on page 6 ).
For your convenience, write the product model name and serial number in the space to the below.
Model Name _______________
________________
Serial No.
Read this manual carefully to learn how to operate and maintain your product correctly. Reading this
manual will help you and others avoid personal injury and damage to the product.
Although BAD BOY designs, produces and markets safe, state of the art products, you are responsible for
using the product properly and safely. You are also responsible for training persons who you allow to use
the product about safe operation.
The BAD BOY warning system in this manual identifies potential hazards and has special safety messages
that help you and others avoid personal injury, even death.
DANGER, WARNING and CAUTION are signal words used to identify the level of hazard. However,
regardless of the hazard, be extremely careful.
DANGER signals an extreme hazard that will cause serious injury or death if the recommended precautions
are not followed.
WARNING signals a hazard that may cause serious injury or death if the recommended precautions are
not followed.
CAUTION signals a hazard that may cause minor or moderate injury if the recommended precautions are
not followed. Two other words are also used to highlight information. "Important" calls attention to special
mechanical information and "Note" emphasizes general information worthy of special attention.
TABLE OF CONTENTS
INTRODUCTION
STARTING AND STOPPING PROCEDURE ............. 13
CARBURETOR ADJUSTMENT ................................ 14
OPERATING THE POWER HEDGE TRIMMER ....... 15
REGULAR MAINTENANCE ...................................... 16
STORAGE ................................................................. 19
TROUBLESHOOTING .............................................. 20
MAINTENANCE PERIOD .......................................... 20
─ 5 ─
English

Publicidad

loading