Publicidad
Idiomas disponibles
Idiomas disponibles
Any other use that is not expressly permit-
ted in this instruction manual may pose
a serious hazard to the user and result in
damage to the device. The operator or
user of the machine is responsible for any
accidents or personal injury and/or mater-
ial damage to third parties or their prop-
erty. The machine is intended to be used
by do-it-yourselfers. It was not designed
for heavy commercial use. The warranty
is void in the case of commercial use. The
manufacturer is not liable for damage
caused by improper use or incorrect oper-
ation.
The device is part of the X 20 V TEAM
series and can be operated with bat-
teries of the X 20 V TEAM series. Bat-
teries of the X 20 V TEAM series may
only be charged using chargers of the
X 20 V TEAM series.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material prop-
erly.
• Cordless Sabre Saw
• 1 Wood saw blade HCS (Swiss made)
• 1 Metal saw blade BIM (Swiss made)
• Storage case
• Translation of the original instructions
The rechargeable battery and
charger are not included in deliv-
ery.
Overview
The illustrations for the
device can be found on the
front fold-out page.
1 Footplate
2 Chuck
3 LED work light
4 Auxiliary handle
5 On/Off switch
6 Switch lock
7 Handle
8 "Connected" indicator
9 Battery holder
10 Battery
11 Button (Charge level indicator)
12 Charge level indicator
13 Battery release
14 Lever
15 Battery charger
16 Storage case
17 Wood saw blade
18 Metal saw blade
Description of functions
The cordless reciprocating saw is a hand-
held saw with a saw blade that moves
back and forth.
Please refer to the descriptions below for
information on how the operating ele-
ments work.
Technical data
Cordless Sabre Saw
..............................PSSAP 20-Li D5
Rated voltage U ............................. 20 V ⎓
Weight with battery (4,0 Ah Smart)
......................................................... ≈2.2 kg
Idle stroke rate ....................0–3000 min
Stroke length ....................................22 mm
Cutting depth
– wood ...................................... ≤ 150 mm
– steel ........................................... ≤ 15 mm
– non-ferrous metal ......................≤ 20 mm
– metal pipe .............................. ≤ 100 mm
Sound pressure level (L
...................................... 84.3 dB; K
GB
MT
−1
)
pA
=5 dB
pA
23
Publicidad
