Publicidad
Idiomas disponibles
Idiomas disponibles
against the body leaves it unstable and
may lead to loss of control.
• Only use accessories recom-
mended by PARKSIDE. Unsuitable
accessories may cause electric shock
or fire.
Further safety instructions for
reciprocating saws
• Keep hands away from the
sawing area. Do not reach under-
neath the workpiece. Upon contact
with the saw blade there is a risk of in-
jury.
• Only when the power tool is
turned on should the sawing
blade be moved against the
workpiece. Otherwise, there is a risk
of kickback if the attachment tools jam
in the workpiece.
• Make sure that the footplate
is secure during sawing. A tilted
saw blade may break or cause a kick-
back.
• After you have finished work,
turn the power tool off and do
not pull the saw blade out of
the cut until it has come to a
standstill. In this way you will avoid
any kickback and can safely put down
the power tool.
• Use only undamaged saw
blades in perfect condition. Bent
or blunt saw blades can break, ad-
versely affect the cut or cause kickback.
• Do not brake the saw blade
after switching the device off
by applying side pressure. The
saw blade may be damaged, break or
cause a kickback.
• Use clamps or another practical
way to secure and support the
workpiece to a stable platform.
Holding the workpiece by your hand or
against the body leaves it unstable and
may lead to loss of control.
• Do not touch any objects or the
ground with the saw running.
There is a risk of kickback.
• Hold the power tool tightly
with both hands while working
and ensure a secure footing.
The power tool is guided more securely
with both hands.
• Switch the appliance off im-
mediately if the sawing blade
jams. Force apart the saw cut
and pull the saw blade out
carefully. This can lead to loss of
control over the power tool.
• Use suitable detectors to de-
termine if there are hidden sup-
ply lines or contact the local util-
ity company for assistance. Con-
tact with electric cables can cause fire
and electric shock. Damaging gas lines
can lead to explosion. Breaking water
pipes causes property damage.
• Always wait until the power
tool has come to a complete
stop before placing it down. The
application tool can jam and cause
you to lose control of the power tool.
Residual risks
There will always be residual risks even
if you operate this power tool according
to the instructions. The following hazards
may occur in connection with the type and
design of this power tool:
• Hearing damage if suitable ear protec-
tion is not worn.
• Health injuries resulting from the effect
of vibration on the hands and arms in
the event that the device is used over
a longer period of time or is not used
and maintained properly.
• Cutting injuries
GB
MT
29
Publicidad
