Publicidad
Idiomas disponibles
Idiomas disponibles
GB
MT
Troubleshooting
The following table will assist you in fixing faults:
Problem
Device does not start
Device works with interrup-
tions
Poor sawing performance
Saw blade quickly becomes
blunt
Disposal/
environmental
protection
Remove the battery from the device and
recycle the device, battery, accessories
and packaging in an environmentally-
friendly manner.
34
Possible cause
Rechargeable battery (10)
not inserted
On/Off switch (5) is broken contact the service centre.
Defective motor
Rechargeable battery (10)
discharged
Internal loose contact
On/Off switch (5) is broken contact the service centre.
Saw blade (17, 18) unsuit-
able for the workpiece to be
processed
Saw blade (17, 18) blunt
Incorrect sawing speed
Low battery power
Saw blade (17, 18) unsuit-
able for the workpiece to be
processed
Too much pressure applied
Sawing speed too high
The symbol of the crossed-out wheeled bin
means that this product must not be dis-
posed of as unsorted municipal waste at
the end of its useful life.
Error correction
Inserting the battery,
p. 32
contact the service centre.
Charge the battery (see the
separate operating instruc-
tions for the rechargeable
battery and charger)
contact the service centre.
Use a suitable saw blade
(17, 18)
Use a new saw blade (17,
18)
Adjust sawing speed
Charge the battery (see the
separate operating instruc-
tions for the rechargeable
battery and charger)
Use a suitable saw blade
(17, 18)
Reduce the pressure
Reduce the sawing speed
Electrical devices must not be dis-
posed of with domestic waste.
Publicidad
