Publicidad
Idiomas disponibles
Idiomas disponibles
GB
MT
3. Continue sawing along the desired cut-
ting line.
Inserting and removing the
battery
WARNING! Risk of injury due to
unintentional start-up. Only insert the re-
chargeable battery into the device once
the device is fully prepared for use.
NOTICE! Risk of damage! An incorrect
battery can damage the device and bat-
tery.
Inserting the battery
1. Push the battery (10) along the guide
into the battery holder (9).
You will hear the battery click into
place.
Removing the battery
1. Press and hold the battery release (13)
on the battery (10).
2. Pull the battery out of the battery hold-
er (9).
Switching on and off
Switching on
1. Place the rechargeable battery into the
device.
2. Hold the device by the handle (7) and
the auxiliary handle (4) (insulated grip-
ping surfaces).
3. Press the switch lock (6).
4. Press and hold the On/off switch (5).
5. Release the switch lock (6).
6. Wait until the device has reached the
full stroke rate.
Switching off
1. To turn it off, release the on/off switch
(5).
2. Do not pull the saw blade out of the
cut until it has come to a standstill.
3. Remove the rechargeable battery from
the device if you are leaving the device
32
unattended or if you have finished
working.
PARKSIDE app
The PARKSIDE app lets you monitor the
device and control certain functions. The
functions may change with updates to the
app and firmware. For more information
on the PARKSIDE app, see the instructions
for the smart battery.
Requirements
To find the device in the PARKSIDE app,
the following requirements must be met:
• The PARKSIDE app is installed on your
smartphone and Bluetooth® is activ-
ated.
• The following battery is inside the
device: PARKSIDE Performance Smart
battery PAPS 204 A1 or PAPS 208 A1.
This battery is already connected to the
PARKSIDE app.
The device communicates with the app
via the battery.
Connecting the device to the
PARKSIDE app
1. Insert the smart battery (10).
2. Press the On/Off switch (5).
The "Connected" display (8) flashes
three times. When the device is con-
nected, the "Connected" indicator
lights up continuously.
3. Open the PARKSIDE app.
D ev ic es.
4.
The device is displayed in the list.
If the device does not appear in the
list, add the device manually.
Monitoring and controlling the
device
D ev ic es.
1.
2.
Select the device from the list.
Publicidad
