. Playback via the AUX IN connection
The A U X I N connection is intended for connection to an external playback ap-
pliance (e.g. CD player or MP3 player).
Switch the audio system to standby mode.
Switch off your external device.
Plug the end of a 3.5 mm jack cable (not included in the package contents) into
the A U X I N socket on the front of the audio system.
Connect the other end of the cable to your external device.
Switch on your external device and audio system.
Press the
button (M O D E on the appliance). Use (turn N A V / O K
on the appliance) to select the operating mode AUX IN and confirm with O K .
The audio signal from your external device can now be played back. Playback is
controlled using the external device.
. Bluetooth
You can use Bluetooth to play tracks wirelessly from external devices such as MP3
players or mobile phones with Bluetooth on this appliance.
Press the
button (M O D E on the appliance). Use (turn N A V / O K
on the appliance) to select the operating mode BLUETOOTH and confirm with
O K .
.. Connecting Bluetooth devices
Enable the Bluetooth function on your external device and then connect to it.
Refer to the user manual for your appliance for more information. The name of
the audio system is "MD 88069".
If you are prompted to enter a password on the external device, enter '0000' as
the password.
The pairing is complete when CONNECTED appears on the display. The external
device can be used on the audio system.
162
®
mode