Publicidad
Idiomas disponibles
Idiomas disponibles
. Operating the appliance
Follow the instructions in the sections "Storing food in the refrigerator"
and "Freezing food" in the user manual.
Connect the appliance to an earthed
mains socket. The local mains
voltage must match the voltage
stated in the technical specifications
for the appliance.
Setting the temperature control (3)
automatically sets the temperature
in the refrigerator and freezer
compartments.
There are 8 possible settings for the
temperature control (3) (see Fig. 7):
0
The appliance is switched off
To de-energise the appliance, set the temperature control (3) to and unplug
the mains plug from the socket.
1
Lowest level of cooling (warmest)
2–5
Intermediate position
7
Highest level of cooling (coldest)
The internal temperatures can be influenced by factors such as the
installation location, ambient temperature and the number of times the
door is opened. Take these factors into account when setting the
temperature control (3).
Do not load the refrigerator compartment (9) or freezer compartment
(13) before the appliance has cooled. Before loading fresh food, set the
temperature of the refrigerator or freezer compartment to the coldest
level by selecting level .
The maximum level of cooling on the temperature control (3) should
only be set for short periods in the event of high external temperatures
or when filling the refrigerator with food that must be cooled quickly.
Once the required interior temperature has been reached, the
temperature control (3) should be readjusted again, otherwise
temperatures inside the appliance fall below 0°C and can damage the
chilled goods.
Fig. 7
DE
FR
NL
ES
IT
EN
109
Publicidad
