Black and Decker NHT518 Manual De Instrucciones página 6

Fertilizers and other garden chemicals contain agents which greatly
accelerate the corrosion of m etals. Do not store the unit on o r
adjacent to fertilizers or chemicals.
With the b attery removed, use only mild soap and a damp cloth to
clean the u nit. Never
let any ]iquJd get inside the unit; never immerse
any part of the unit into a liquid.
Prevent the blades from rusting by apptying a film of light machine
oil after cleaning.
WAR N ING: DO NOT use t he
hedge
td .......ith
any type of accessory or atiachment. Such usage might be
hazardous.
Service Information
Whether you need technical advice, repair, or genuine factory
replacement parts, contact the Black & Decker location nearest you.
To find your local service location, refer to the yellow page directory
under "Tools-Electric" or call: f -800-544-6986 or visit
www.blackanddecker.com.
IMPORTANT
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by authorized service centers
or other quafified service organizations, always using identical
replacement parts.
Battery Recycling and the RBRC
TM
Seal //_'X
The RBRC
TM
(Rechargeab]e Battery Recycling
Corporation) Seal on the nickel-cadmium battery (or
battery pack) indicates that the costs to recycle the
battery (or battery pack) at the end of its useful life have
already been paid by Black & Decker. In some areas, it is illegal to
place spent nickeeqadmium batteries in the trash or municipal solid
waste stream and the RBRC program provides an environmentally
conscious alternative.
RBRC in cooperation with Black & Decker and other battery users,
has established programs in the United States and Canada to
lO
facilitate the collection of spent nickebcadmium batteries. Help
protect our environment and conserve natural resources by
returning the spent nickebcadmium battery to an authorized
Black & Decker service center or to your local retailer for recycfing.
You may also contact your local recycling center for information on
where to drop off the spent battery, or call 1-800-8-BATTERY.
Full Two -Year Home Use Warranty
Black & Decker (U.B.) Inc. warrants this product for two years
against any defects in material or workmanship. The defective
product will be replaced or repaired at no oharge in either of two ways:
The first, which will result in exchanges only, is to return the product
to the retailer from whom it was purchased (provided that the store
is a participating retailer). Returns should be made within the time
period of the retailer's policy for exchanges (usually 30 to 90 days
after the sale). Proof of purchase may be required. Please check
with the retailer for their specific return policy regarding returns that
are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a
Black & Decker owned or authorized Service Center for repair or
replacement at our option. Proof of purchase may be required.
Black & Decker owned and authorized service centers are listed
under "Tools-Electric" in the yellow pages of the phone directory.
This warranty does not apply to accessories. This warranty gives
you specific legal rights and you may have other rights which vary
from state to state. Should you have any questions, contact the
manager of your nearest Black & Decker Service Center. This
product is not intended for commercial use.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, ca]] 1-800-544-6986 for a free
replacement.
LATIN AMERICA: This warranty does not apply to products sold in
Latin America. For products sold in Latin America, check country
specific warranty information contained in the packaging, ca]] the
local company or see the website for warranty information.
TROUBLESHOOTING
Problem
• Slow running, noisy or hot blades.
• Unit will not start.
• Battery won_ charge.
Possible Cause
• Dry, corroded blades.
• Blades or Made support bent.
• Bent or damaged teeth.
• Loose blade bolts.
• Battery not installed properly.
• Battery not charged.
• Lock off not fully operated.
• Battery not inserted into charger.
• Charger not plugged in.
• Surrounding air temperature too hot or too cold.
Possible Solution
• Lubricate Made&
• Straighten blade or Made support.
• Straighten teeth.
• Tighten blade bolts.
• Check battery installation.
• Check battery charging requirements.
• Check that lock off is fully forward prior to
moving main trigger.
• Insert battery into charger ulttil green LED appears.
• Plug charger into a working outlet. Refer to
"Important Charging Notes" for more details.
• Check current at receptacle by plugging in a
lamp or other appliance.
• Check to see if receptacle is connected to a
light switch which turns power off when you turn
out the lights.
• Move charger and tool to a surrounding air
temperature of above 40 degree F (4.5°C) or
below 105 degree F (+40.5°C).
For assistance, visit our website www.blackanddecker.com for the location of the service center nearest ou or caII the BLACK &
DECKER help line at 1-800-544-6986.
Importedby
Black & Decker(U.S.)lnc., See'Tools-Electric' I_]
701E. Jegpa Rd. -Yellow Pages-
Towson, MD 21286 U.S.A. for Service & Sales
ENERGY STAR :
q u alified battery
better environment IJ