Publicidad
Idiomas disponibles
Idiomas disponibles
SAVE THESE
INSTRUCTIONS
Functional Description
A
C
D
E
Figure
1: Cordless Impact Wrench
A. Friction Ring Anvil
B. Forward/Reverse Bar
C. Trigger
D. Release Button
E. Battery Pack
F. Power Settings
Specifications
Impact Wrench Specifications
Square Drive Size ..................................................
.......................... 3/8" (9.5mm) Friction Ring Anvil
Tightening Torque ............... 275 ft. lbs. (370 N•m)
Bolt Breakaway Torque ..........525 ft.lbs (712 N•m)
Free Speed ............................................ 2050 rpm
Impacts per Minute ................................3300 ipm
Motor Voltage ........................................18.0 VDC
Weight with Battery Pack (Lithium-Ion)
CT9038 ...................................... 4.4 lbs. (2.0 kg)
Noise* (Tested in accordance with EN 62841)
Sound Pressure Level (A) .......................94.9 dB
Uncertainty, K ...........................................1.3 dB
Sound Power Level (A) .........................106.5 dB
Uncertainty, K ...........................................1.3 dB
Vibration* (Tested in accordance with EN 62841)
Vibration Level .....................................5.95 m/s
Uncertainty, K ......................................0.86 m/s
ZCT9038CE Rev. C
* NOTE: The declared vibration total value(s) and
the declared noise emission value(s) have been
measured in accordance with a standard test
method and may be used for comparing one tool
with another. The declared vibration total value(s)
and the declared noise emission value(s) may also
be used in a preliminary assessment of exposure.
The vibration and noise emissions during actual
use of the power tool can differ from the declared
values depending on the ways in which the tool is
used especially what kind of workpiece is
B
processed. Identify safety measures to protect the
F
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Snap-on disclaims liability for the consequences of
using the declared values, instead of values
reflecting the actual exposure determined in an
individual risk assessment in a work place situation
over which we have no control.
Symbology
2
n
xxx/min
0
2
7
SYMBOLOGY
REFER TO INSTRUCTION
MANUAL/BOOKLET
WEAR EYE PROTECTION
WEAR HEARING PROTECTION
VIBRATION HAZARD
VOLTS
DIRECT CURRENT
NO LOAD SPEED
(10/23)
Publicidad
