the left or right turn signal lamp will flash accordingly.
2 Neutral position indicator lamp
The neutral indicator N illuminates when the trans-
mission is in the neutral position.
3 Engine oil indicator
When the engine is not started after the power is
turned on, the engine oil indicator light is always on;
if the engine oil pressure is normal after the engine is
started, the engine oil indicator light will go out; if the
engine oil indicator light does not go out, the engine
oil pressure may be abnormal, and it is necessary to
stop the engine for inspection; when the engine oil is
insufficient, the engine oil indicator light will be on, so
as to add engine oil in time.
4 Engine malfunction indicator
When the key is turned on, the indicator light is on,
the oil pump works for 3 seconds, and then the
motorcycle is started. If the indicator is off after the
motorcycle is started, the vehicle is normal and there
is no fault; If the indicator is on, there is a fault. Simi-
larly, in the course of driving, if the indicator light is
off, the motorcycle runs normally. If the indicator light
is on, the motorcycle has a fault and needs to be
stopped for inspection. Please contact QJMOTOR
Motorcycle Distribution Department or Maintenance
Center to check the motorcycle in time.
5 High beam indicator
The high beam indicator illuminates when the head-
light high beam light is illuminated.
6 Light sensing window
It automatically senses the light and shade around
the motorcycle and automatically adjusts the instru-
ment to day mode or night mode.
7 ABS indicator:
Indicate the working state of ABS. See "ABS use
and maintenance instructions" (page 48).
8 Fuel quantity indicator
It indicates how much fuel is in the fuel tank. When
the fuel is filled up (F position), the fuel level of 6 bars
will be displayed; when the fuel is insufficient and the
fuel level is 1 bar, the last grid will flash and the fuel
alarm light will be on; when there is no fuel, the fuel
level of 0 bar will be displayed and the fuel alarm
light will be on.
8