To install the driver's
seat cushion, push the
seat cushion from the
rear to the front, push
the hook ⑦ on the back
of the seat cushion into
the seat cushion fixing
groove ⑧; align ⑨ on both sides of the seat cushion
with ⑩ and press it down, the screw hole ⑩ corre-
sponds to the hole ⑨, install the fixing screw, and
then the driver's seat cushion can be installed.
Front shock absorber
Clockwise rotation of
slotted screwdriver (H
Direction) Right and left
shock absorber knobs,
reset resistance
The force increases and the restoring damping force
decreases for counterclockwise rotation (S direc-
tion). Adjust the left and right shock absorbers to the
same damping force level.
Factory adjustment is 2 turns (use a slotted screw-
driver to adjust the adjusting bolt clockwise (H direc-
tion) to the maximum limit, and then rotate it back (S
direction) for 2 turns.
Shock absorption adjustment requires profession-
al skills. Please contact the local QJMOTOR
service station to adjust the shock absorption.
Private adjustment may cause safety accidents
due to uncoordinated adjustment.
When the adjuster is rotated to the limit position,
please do not continue to rotate in this direction,
otherwise the shock absorber will be damaged.
Right
Left
Rear shock absorber
The rear shock absorber of this
vehicle is mainly composed of damp-
ing spring and hydraulic damper,
which can be adjusted according to
various factors such as driver's prefer-
ence, vehicle load bearing and road
conditions. When adjusting, the rear
wheel support frame shall be used to stabilize the
24
Warning