Publicidad
Idiomas disponibles
Idiomas disponibles
for rollover. When the vehicle rolls over or tilts to a
certain angle, the engine will automatically flameout
to prevent the resulting danger.
Adjustment of rearview mirror
When
the
rearview mirror is
in the retracted
state, hold the
Mirror rod
rearview
mirror
Unfold
lever and rotate
the mirror lever outward to unfold the rearview
mirror, and then rotate the mirror lever inward to
retract the rearview mirror.
There is an adjusting ball head ① between the
rearview mirror lever and the mirror frame, which
can adjust the angle of the rearview mirror. Adjust
the mirror frame properly until the rear view is clear.
Notice
When driving the motorcycle, please unfold the
rearview mirror, with the driver sitting on the
driver's seat, and adjust the rearview mirror frame
to ensure that the driver has sufficient rear vision.
Picture frame
Fold
23
Seat cushion handling
Insert the key into the key
hole ① at the lower left of
the seat cushion, rotate
the key clockwise, and
pull up the front part of the
passenger seat cushion to
remove
the
passenger
seat cushion.
Remove the screws ② on
both sides of the driver's
seat cushion, pull it back-
wards and then lift it
upwards to remove the
driver's seat cushion.
To install the passenger seat cushion, push the seat
cushion from the rear to the front, push the hook ③
on the back of the seat cushion into the seat cushion
fixing groove ④; align the seat cushion lock hook ⑤
on the back of the seat cushion with the lock hole ⑥,
press down the rear of the seat cushion, and hear
the seat cushion lock click, indicating that the seat
cushion has been installed.
Publicidad
