Publicidad
Idiomas disponibles
Idiomas disponibles
Short press the up/down selection key to switch
TOT/TRIP A/TRIP B;
Long press:
When the odometer is in the small mileage state
(TRIP A or TRIP B), long press the up and down
selection key to clear the small mileage.
Tire pressure setting:
Short press the "ENTER" confirmation button to
enter the instrument selection main menu page,
select "tire pressure setting", select the tire pressure
unit, select the front and rear wheel sensor learning,
and the string will be displayed after successful
pairing learning. The lower part of the main interface
of the instrument displays the temperature and pres-
sure information of the front and rear tires. When the
tire is abnormal, the tire alarm light will light up, and
the text alarm content will appear in the "fault alarm
display area" on the instrument. Text alarm
contents include: high (low) air pressure of front
(rear) tire, high temperature of front (rear) tire, quick
air leakage of front (rear) tire, low voltage of front
(rear) tire, no signal of front (rear) tire, etc.
When the tire sensor is not learned, no relevant
information is displayed on the main interface of the
instrument, and the tire pressure icon is not
displayed in the power-on self-test.
Traction control system:
When the motorcycle is running on a slippery road,
the driving wheel of the motorcycle without TCS
function is easy to slip when accelerating, which may
cause the motorcycle to flick its tail, making it difficult
for the driver to control his balance and fall down.
The EMS EFI system relies on the ABS signal.
When it detects that the speed of the driving wheel is
greater than that of the non-driving wheel (which is
the characteristic of slip), it will reduce the engine
output torque by adjusting the ignition time and
reducing the throttle opening, so that the wheels will
no longer slip.
14
Publicidad
