Descargar Imprimir esta página

ProBreeze PB-F-22 Manual De Instrucciones página 14

Ventilador de torre sin aspas

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 63
OPERATING INSTRUCTIONS
― ―
On/Off
Fan Speed
Modes
Temperature
control
14 of 122 | English
Press On/Off button on the control panel.
To turn the fan speed up or down, either press the fan speed button
on the remote or on the control panel. The speed indicator on the
led display will change to reflect the speed from 1-10.
Modes: To choose your desired mode, either press the mode button
on the remote or on the control panel. Pressing this button will cycle
through the below modes:
Fan mode: In this mode, you can control the fan speed from
settings 1-10. To choose your desired fan speed press the fan
speed button or the '±' buttons on the remote to adjust.
Natural mode: In this mode, the fan auto-cycles through
fan speeds to mimic natural airflow. To choose between two
available speed settings press the fan speed button or the '±'
buttons on the remote to adjust
Night mode: Night mode slowly reduces the fan speed until
it switches to the lowest speed setting to save energy as you
sleep. Once activated, the fan speed will function on high
speed for 30 minutes and will then reduce to mid speed for
30 minutes and low speed for 30 minutes before switching
off. After 60 seconds, the display lights will turn off for an
undisturbed rest. To choose between the two available night
settings press the fan speed button or the '±' buttons on the
remote to adjust.
Air Quality mode: Air Quality mode automatically changes the
speed of the fan depending on the air quality of the room. The
lower the air quality the higher the fan speed will be.
In any operating modes, you can activate temperature control
which will amend the fan speed to achieve an ambient
temperature according to the table below:
When the room
temperature is increasing
When the room
temperature is decreasing
≥30°C
The fan speed level will increase by
2 levels when the room temperature
has increased by 1°C.
<30°C
The fan speed level will increase by 1
level when the room temperature has
increased by 1°C.
≥31°C
The fan speed level will decrease by
2 levels when the room temperature
has decreased by 1°C.

Publicidad

loading