Acqua Brevetti BravoMATIC Manual De Instrucciones página 36

Control panel
The control panel (code 23022030) allows directly controlling up to two 24 Vac powered devices (EVC
solenoid valves, relay for pumps, alarms, etc.).
The panel has a specific input for the voltage-free contact with which BravoMATIC is equipped. The
connected devices are controlled by the panel when the voltage-free contact signal of the BravoMATIC
filter is received (backwashing stage). At the end of the backwashing procedure, a signal is sent to switch
off/close the devices connected to the panel.
A1.15 Other connections (optional)
BravoMATIC has 2 outputs for the solenoid valves and an input for the pressure differential
switch to be connected as follows:
Remove the rear cover by using a screwdriver, inserting it in the 2 slots, and proceed as shown in the
following figure:
BravoMATIC - ENGLISH
MAN139 PAGE E-9