Publicidad
Step 20
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D30 and D31).
å
Fasten a DRAWER RIGHT (35AC) to the RIGHT DRAWER SIDE (D30) and a DRAWER LEFT (35AD) to the LEFT
å
DRAWER SIDE (D31). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
NOTE: The glides are not intended to rotate.
å
Fasten a PULL (102K) to the DRAWER FRONT (L). Use two BLACK 7/8" MACHINE SCREWS (37S).
å
Glide end
1
2
37S
BLACK 7/8" MACHINE SCREW
(2 used in this step)
www.sauder.com/service
10A
D31
102K
GOLD 5/16" FLAT HEAD SCREW
(4 used for the SLIDES)
425011
VIEW THE DRAWER GLIDE VIDEO
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D30
L
3S
10A
Glide end
1
2
Page 25
Publicidad
