Parts List; Lifting And Handling; Rules For Ordering Spare Parts; Transport And Storage - Mase EA 50 R Manual De Uso Y Mantenimiento

6.1 Parts list

The parts list includes the information necessary to
order the spare parts required for preventive or corrective
maintenance including those the user is recommended
to keep in stock.

6.2 Rules for ordering spare parts

When ordering spare parts, provide the following
information:
1) Machine model
2) Serial number
3) Year of construction
4) Table number
5) Part reference number
6) Quantity required
7) Inspection method
Place the order for spare parts by filling in the form
in all of its parts.
EA 50 R - EA 80 R - EA 60 RT - EA 90 RT
7 TRANSPORT, STORAGE,

LIFTING AND HANDLING

7.1 Transport and storage

Packaging: Supplied directly by Mase Generators.
The total weight of the packed generator is given in
Paragraph 2.5 "Table of technical characteristics".
It is strictly prohibited to pollute the environment with
the packaging
Transport: During transport the generator (with or without
packaging) must be protected against atmospheric agents,
it must not be turned upside down and must be protected
against knocks. The generator must be transported without
oil and fuel to prevent leaks during travel.
Storage: The generator must be stored in horizontal position
and away from atmospheric agents and humidity.
7.2 Lifting and handling
Always check that the capacity of the lifting means and
its accessories is greater than the weight of the generator
printed on the identification plate.
Use a lift truck to handle the generator (with capacity
greater than the weight of the generator indicated in the
table of technical characteristics - Paragraph 2 of the Use
and Maintenance Manual), inserting the forks under the
base at the lower part of the generator.
The generators of the EA series are fitted with a lifting hook
to be used for handling (Fig. 2 Ref. 9).
Hook the generator carefully and lift it slowly without
sudden movements to prevent damage to the generator.
keep a safe distance and the operators must wear
protective helmets.
For handling on level ground, a transpallet is sufficient with
a suitable capacity according to the table of technical
characteristics - Paragraph 2 of the Use and Maintenance
Manual.
N.B. The centre of gravity of the generator corresponds to
about the
centre of its geometrical volume.
Trolley:
A two-wheel trolley is available to transport the generators
of the EA series.
Figure 4 illustrates an assembled trolley and the components
making up the kit.
During lifting all personnel must
GB
GB
- 23