Publicidad
Idiomas disponibles
Idiomas disponibles
•
The available power levels are presented
EN
indicatively.
Note: The device shows the temperature around the
location of the sensor and is not a means of accurately
measuring the ambient temperature.
MOVING OF THE APPLIANCE:
If the appliance has to be moved, switch it off by
the Heater switch and if a fan is available in your
appliance switch it off by the Fan switch. Take the
power plug out of the power socket, holding the
appliance handles with both hands, move it to its
new position, having in mind that the appliance must
get cold (cooled down) before doing this. Moving
hot appliances may lead to undesired consequences
for the user like burns or entering of inflammable
materials entering the electric convector during its
movement.
DESCRIPTION OF MAIN PARTS:
A. Left end cap of the electric convector
B. Handle
C. Right end cap of the electric convector
D. Signal lamp
E. Heating adjustment switch
F.
Thermostat switch
G. Foundation of the appliance
H. Protection grille
I.
Power cord
A
G
IN-BUILT OVERTURN (FALL) PROTECTION SWITCH
The electric convector has got an in-built overturn
protection switch. In case the electric convector overturns,
the power supply will be stopped. Let the electric
convector cool down and then put it into upright position
again. The appliance will restore its normal operation.
AUTOMATIC SAFETY STOP
There is an in-built device in the electric convector (self-
restoring thermal switch), which actuates automatically
and switches off the electric convector in case of
4
Usage and Storage Instructions
B
D
E
F
C
H
overheating. The thermal switch will restore its normal
state when the appliance temperature decreases to its
normal level.
Important!
It is possible during initial operation of the appliance a
specific odour to be emitted. This is normal at the initial
period of operation. Ensure that the electric convector is used
in a well-ventilated room and let it work until the odour
disappears.
You may hear a specific sound resembling popping until the
electric convector warms up. This is normal and the electric
convector operates in normal mode. As soon as the electric
convector warms up this sound will disappear.
CLEANING
•
It is compulsory first to switch off the appliance and
disconnect its power cord from the socket. Before
starting cleaning the electric convector you should
wait until it cools down after disconnecting it from
the power socket.
•
Clean the body of the appliance with a damp cloth,
vacuum cleaner or soft brush.
•
Never immerse the appliance into water – there is
danger to your life from electric shock!
•
Never use petrol, thinner or coarse abrasive
products for cleaning because they will damage the
surface coating of the appliance.
STORAGE
•
Before putting away the electric convector let it cool
down after disconnecting it from the power socket.
•
Use the original packing for storing the electric
convector if it will not be used for a certain period of
time. The product is protected from excessive dust
and dirt when it is kept in its original packing.
•
Never put a hot appliance into its packing!
•
The product is necessary to be stored at a dry place
away from direct sunlight.
•
It is explicitly forbidden to store the appliance in
wet or damp premises.
PRODUCT PACKING SET INCLUDES:
I
Electric convector
Castors
Manual
Guarantee certificate
TECHNICAL CHARACTERISTICS OF THE APPLIANCE:
Model
Rated power
CN 221 MC
2000W
Environment protection instructions
Old electric appliances contain valuable materials
and therefore should not be disposed of as domestic
waste! We ask you for your active cooperation to
protect the resources and the environment by
submitting your appliance to organized buy-back
stations (if there are such).
1 pc.
2 pcs.
1 pc.
1 pc.
Rated voltage
Rated fre-
quency
220-240V~
50Hz
Publicidad
