Publicidad
Idiomas disponibles
Idiomas disponibles
Communication disruption
Device Battery / Error Battery
In the event of an internal fault in the battery or a communication
fault between the power tool and the battery, the power tool will
automatically stop or will not start. In this case, remove the battery
and insert it again.
If the malfunction persists for a longer period of time,
please contact the Würth MASTERSERVICE.
Soft Start
Electronic soft start for save use prevents jerky run-up of the
machine.
Braking System
The run-on brake engages when the trigger is released, causing
the tool to stop within seconds.
Make sure that the insertion tool comes to a complete stop before
laying it down.
In comparison with tools without a run-on brake the run-on time
will be highly reduced by braking.
Maintenance
If there is a lot of metal dust, the machine must be protected
against the ingress of dust with the dust protection cap.
Attention!
•
The grilles should be cleaned regularly with a brush or by
blowing out/blowing with dry compressed air.
•
Regularly, frequently and thoroughly vacuum out the power
tool through all front and rear air vents or blow it out with
dry air.
•
Disconnect the power tool from the power supply
beforehand and wear protective goggles and a dust mask.
•
Blowing at the ventilation slots in the order rear left, right or
center is not decisive here, but it is more important that the
cleaning process is carried out regularly and the machine is
blown from behind so that dirt can escape through the air
openings at the front.
Repairs to the device may only be carried out by
appointed and trained personnel. For such purposes,
always use original spare parts from Adolf Würth GmbH & Co.
KG. This will ensure the continuing safe operation of the device.
Accessories and spare parts
If. in spite of careful manufacturing and testing processes,
the device becomes faulty, a repair by Würth MASTERSER-
VICE should be arranged.
With any enquiries or spare parts orders, always quote the
article number as given on the name plate. The latest spare
parts list for the device is available online at http://www.
wuerth.com/partsmanager. Alternatively, contact your
local Würth agency for a hardcopy.
Disposal
To protect the environment, the product, accessories and packaging
must be disposed of separately.
Do not dispose of electrical appliances in household waste!
EU countries only:
In accordance with the EU Directive on Waste
Electrical and Electronic Equipment and its
transposition into national law, electrical
equipment which is no longer functional must be
collected separately for environmentally friendly
recycling..
Symbols
Read the instruction manual carefully before using
the appliance.
CAUTION! WARNING! DANGER!
The product supports NFC technology for iOS and
Android platforms.
By reading the serial number using NFC technology,
the device can be identified in the supported Würth
iOS and Android applications.
Remove the battery pack before starting any work
on the appliance.
Rotation direction / Rotation direction
Wear goggles.
Wear ear protectors.
Wear a suitable dust protection mask.
Wear gloves
Always operate with two hands.
Do not use the guard for cut-off operations.
Only for grinding.
Only for cutting work.
Pay attention to permissible disc thickness.
Do not use force.
31
Publicidad
