Descargar Imprimir esta página

Shark HYDROVAC WD200EU Serie Manual De Instrucciones página 19

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
1.
Align the Pole with the opening in the
Main Body and insert it until it clicks into
place.
Handle
Pole
(Click)
Main Body
NOTE: To remove the pole and handle, press the release button located on the back of the unit with a thin tool while pulling
up on the handle.
s h a r kc l e a n . e u
ASSEMBLY
2.
Place the Storage and Charging Dock
on the floor near a wall outlet and plug
in the cord. Wind the remaining cord
around the Cord Wrap on the back of
the dock.
Prior to first use, charge the battery completely. A full charge takes approximately 4 hours.
Visit sharkclean.com/support online.
LED BATTERY POWER AND CHARGING INDICATOR
Cord Wrap
Dock
NOTE: The Shark® battery, like all lithium-ion batteries, will naturally decrease in capacity over time from the 100% capacity of
a new battery.
LI-ION BATTERY
RUNTIME FOR FULLY CHARGED BATTERY
Charging
Low Charge
Mid Charge
Nearly Full
Full Charge
Note: Full Charge takes approximately 4 hours.
In Use
Full Charge
Mid Charge
Nearly Empty (Pulsing)
No Charge
s h a r kc l e a n . e u

Publicidad

loading