Bosch TT 018 Instrucciones De Servicio página 11

1 609 929 C65 - Buch Seite 3 Mittwoch, 11. August 2004 1:16 13
Dust/Chip Extraction
(see figure )
F
(Only for France)
Fasten the extractor connection 13 facing across
from the spark guard, using two fastening bolts.
Maintenance and Cleaning
Before any work on the machine itself, pull
the mains plug.
For safe and proper working, always keep
the machine and the ventilation slots clean.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an authorized after-sales
service centre for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article number
given on the nameplate of the machine.
Environmental Protection
Recycle raw materials instead of disposing as
waste
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for catego-
rised recycling.
Service and Customer
Assistance
Exploded views and information on spare
parts can be found under:
www.bosch-pt.com
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
Service +44 (0) 18 95 / 83 87 82
............................
Advice line +44 (0) 18 95 / 83 87 91
....................
Fax +44 (0) 18 95 / 83 87 89
.............................................
11 • 1 609 929 C65 • TMS • 15.07.04
Ireland
Beaver Distribution Ltd.
Greenhills Road
Tallaght-Dublin 24
Service
...................................
Fax
....................................................
Australia
Robert Bosch Australia Ltd.
RBAU/SPT2
1555 Centre Road
P.O. Box 66 Clayton
3168 Clayton/Victoria
...............................................
Fax
...............................................
www.bosch.com.au
E-Mail: CustomerSupportSPT@au.bosch.com
New Zealand
Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand
.....................................................
Fax
.....................................................
Declaration of Conformity
We declare under our sole responsibility, that this
product is in conformity with the provisions of the
directive 98/37/EC.
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Subject to change without notice
English - 3
+353 (0)1 / 414 9400
+353 (0)1 / 459 8030
+61 (0)1 / 800 804 777
+61 (0)1 / 800 819 520
+64 (0)9 / 47 86 158
+64 (0)9 / 47 82 914
Dr. Eckerhard Strötgen
Head of Product
Certification