Transport And Storage - Amprobe AT-2032 Manual De Instrucciones

Product Description/Scope of supply
The Cable Locator consists of a transmitter and a receiver. The Cable Locator is characterized
by the following features:
• Finding conductors in walls, conductor interruptions, short-circuits in conductors
• Detecting fuses and assigning current circuits
• Tracing sockets and distribution sockets having accidentally been covered by plastering
• Detecting interruptions and short-circuits in floor heating
• Tracing metallic water and heating piping
• All application areas (both, voltage-free and live) are performed without using any addi-
tional instruments
Scope of supply:
1 pc. AT-2032 Cable Locator Transmitter
1 pc. AT-2032 Cable Locator Receiver
4 pcs. Test Leads
3 pcs. Battery 9 V, IEC 6LR61
2 pcs. Cocodile Clamps
2 pcs. Test Probes
1 pc. Carrying Case
1 pc. Users Manual

Transport and Storage

• Please keep the original packaging for later transport, e.g. for calibration. Any transport
damage due to faulty packaging will be excluded from warranty claims.
• In order to avoid instrument damage, it is advised to remove batteries when not using the
instrument over a certain time period. However, should the instrument be contaminated
by leaking battery cells, you are kindly requested to return it to the factory for cleaning and
inspection.
• Instruments must be stored in dry and closed areas. In the case of an instrument being
transported in extreme temperatures, a recovery time of at least 2 hours is required prior
to instrument operation.
6