C O N N E CT
CAMERA
Use supplied USB-C – USB-C cable to connect
Use supplied 3.5mm – 3.5mm cable
to connect MoveMic Receiver to your
your MoveMic Receiver to the USB-C port on your
phone.
camera or DSLR.
Mount MoveMic Receiver onto the cold
Note, using MoveMic Receiver (wired) will give
you additional compatibility to third party apps in
shoe on the top of your camera.
comparison to using your MoveMic products via
Bluetooth. Bluetooth is only recommended for
use with ShurePlus MOTIV apps
and approved apps.
Phone mount sold separately.
USB-C – Lightning sold
separately for Lightning
iPhones.
PHONE
PA I R I N G
REMOVE
1
Remove microphone(s)
from Charge Case and put
in pairing mode by holding
button for 6 seconds.
Important: Ensure MoveMic lavalier
mics and MoveMic Receiver are
charged before use.
PAIRING MODE
2
Navigate to 'My Device'
menu and select
'Connect New Mic'.
Click on the MoveMic
3
lavalier microphone(s)
within the 'My Device'
menu to pair